• 527-piece mechanical Metric and inch tool set with 8-drawer roller cabinet JET.8GM3 and chest JET.C4GM3
| Reference | Qty | Description |
|---|---|---|
| 113A | 2 | Adjustable wrenches 6" and 10" |
| 115A.100 | 1 | Pin wrench |
| 134A.18 | 1 | Pipe wrench |
| 138A.18 | 1 | Strap wrench 4" |
| 167A | 3 | Outside-circlip® pliers 13 - 18 - 23 |
| 169A | 3 | Inside-circlip® pliers 13 - 18 - 23 |
| 181A.25CPE | 1 | Lockable multigrip pliers |
| 181A.30G | 1 | Lockable multigrip pliers |
| 185.20CPE | 1 | Sheathed straight half-round nose pliers |
| 187.18CPE | 1 | Sheathed combination pliers |
| 188.16CPE | 1 | Sheathed flat-nose pliers |
| 189.17CPE | 1 | Sheathed round-nose pliers |
| 191A.18EL | 1 | Low-effort cutters |
| 192.16CPE | 1 | Piano wire diagonal cutters |
| 195.20CPE | 1 | Sheathed angled half-round nose pliers |
| 200H | 2 | Riveting hammers 24 and 32 mm |
| 208A.32CBA | 1 | Interchangeable-tip mallets |
| 212A.40 | 1 | Dead-blow hammer |
| 221.227J2 | 41 | Tap and die set (in a case) |
| 222A.TJ19 | 19 | Box set of drill-bits 1 to 10 mm |
| 231 | 1 | Three-square scraper |
| 234 | 1 | Scriber |
| 237.A | 1 | Thread restoring tool |
| 239 | 1 | Refrigeration" flaring tool (in a case) |
| 239.EA | 1 | Inch dies |
| 245.J2 | 26 | Set of gasket punches in a case |
| 247.G | 5 | Sheathed nail-sets: 2 - 3 - 4 - 6 - 8 mm |
| 249.G | 5 | Sheathed drift punches set: 2 - 3 - 4 - 6 - 8 mm |
| 256.4 | 1 | Precision centre punch 4 mm |
| 257.G | 1 | Sheathed automatic centre punch |
| 263.18 | 1 | Chisel |
| 265.20 | 1 | Constant-profile cape chisel |
| 269 | 1 | Crowbar |
| 285.JS10 | 10 | Set of stud extractors |
| 31.JE6T | 6 | Roll set of low profile open-end wrenches 8 to 19 mm |
| 311B.60 | 1 | Level with protractor dial |
| 334B.35 | 1 | Tube cutter 3 to 35mm |
| 374A.20 | 1 | Double-action oil can |
| 39.JE10T | 10 | Roll set of short combination wrenches 3.2 to 11 mm |
| 401.MT | 1 | Extra-long flat-nose precision pliers |
| 403.MT | 1 | Precision angled half-roundnose pliers |
| 405.12MT | 1 | Precision diagonal cutters |
| 40LA | 4 | Long combination wrenches 33, 35, 36, 38 mm |
| 43.JE5T | 5 | Roll set of flare-nut wrenches 7 to 19 mm |
| 44.JE12 | 12 | Open-end wrenches 6 to 32 mm |
| 440 | 6 | Combination wrenches 26 to 30 and 32 mm |
| 440.JE18 | 18 | Combination wrenches 6 to 24 mm |
| 440.JU12 | 12 | Combination wrenches 1/4" to 15/16" |
| 449.Z3A | 1 | Crimping plier and terminal set |
| 495A.22EL | 1 | Heavy-duty end nippers |
| 501 | 1 | Long-nose lock-grip pliers |
| 507A | 1 | Compact lock-grip pliers |
| 509 | 1 | Compact lock-grip pliers |
| 521.200 | 1 | Sliding jaw lock-grip clamp |
| 603F | 1 | Hacksaw frame |
| 668B.8 | 10 | Bimetal hacksaw blades |
| 701B | 1 | Multifunction tester |
| 777B.230 | 1 | Inspection lamp |
| 804 | 1 | Feeler gauge, 19 blades |
| 809.J2 | 8 | Measuring and scribing instrument kit |
| 827B | 1 | Magnetic retriever |
| 82H.JP9A | 9 | Sleeve set of hexagonal keys: 1.5 to 10 mm |
| 82H.JU10 | 10 | Roll of offset hexagonal keys 1/16" to 3/8" |
| 830A.10 | 1 | Ratchet tool-holder |
| 830A.10L | 1 | Long ratchet tool-holder |
| 834.R2 | 1 | Articulated mirror |
| 83SH.JP9A | 9 | Sleeve set of spherical head hex keys 1.5 to 10 mm |
| 840.1 | 1 | Electricians knife with wire stripper |
| 841 | 1 | Electricians scissors |
| 84E.J1 | 5 | Case-set of nut spinners |
| 883B | 1 | Right-cut scroll shears |
| 887A | 1 | Nibblers |
| 89.JP8A | 8 | Torx® keys no. 10 to 45 |
| 893.316 | 1 | Locking tape measure 3 m |
| 94A.JE13T | 13 | Roll set of nut spinners 3.2 to 14 mm |
| 980C | 1 | Serrated shears |
| 985761 | 1 | Automatic wire cutter-stripper |
| 990.B1 | 1 | Bolt cropper |
| 996.5 | 1 | Steel cable cutters |
| A.VE | 3 | 1,000 V insulated screwdrivers slotted head 3.5x100 - 4x100 - 6.5x150 mm |
| AEF.J1 | 5 | Case set of Micro-Tech® screwdrivers |
| AF | 1 | Screw starter for slotted heads |
| AN | 5 | Screwdrivers for slotted heads: 3.5x75 - 4x100 - 5.5x100 mm and short: 4x35 - 6.5x35 mm |
| AND | 3 | Screwdrivers for Pozidriv® PZ heads no. 0-1-2 |
| ANF | 2 | Screwdrivers for slotted heads 6.5x150 - 8x200 mm |
| ANP | 5 | Screwdrivers with Phillips® PH 0-1-2 head and short: 1x35 - 2x35 mm |
| AP.VE | 2 | 1,000 V insulated screwdrivers Phillips® PH 1x100 - 2x125 |
| AP6X80 | 1 | Square punch |
| AS.12LTP180T2 | 12 | Wallet set of needle files, 180 mm |
| AV.HT1B | 1 | Voltsage tester screwdriver 90 to 480 Volts |
| AWDH3X150 | 1 | Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder |
| AWH10X175 | 1 | Hexagonal blade screwdriver for slotted heads with hexagon shoulder |
| AWPH3X150 | 1 | Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder |
| DELA.1051.05 | 1 | Rule 300 mm |
| K.432E | 16 | 3/4" "truck" sockets and accessories: 30 to 55 mm (in a case) |
| NS.265M | 21 | Impact screwdriver set with bits |
| NS.500A | 26 | 1/2" impact sockets and accessories: 8 to 27 mm |
| R.40U | 11 | Rack socket-set 3/16" to 9/16" |
| RL.NANO1 | 38 | 1/4" sockets: 5.5 to 14 mm and accessories (in a case) |
| S.141A | 1 | 1/2" long drive hinged handle |
| S.306A200 | 1 | Torque wrench 40 to 200 Nm |
| S.40U | 7 | Rack socket-set 3/8" to 21/32" |
| S.41U | 6 | Rack socket-set 11/16" to 1" |
| S.440AP | 29 | 1/2" Sockets and accessories: 8 to 32 mm (in a case) |
| STG | 5 | Files |
| T5.L65 | 1 | Trigger-release lock-grip pliers (with aluminium griping) |
| U.302 | 1 | 3-leg puller 6 to 80 mm |
| U.306A140 | 1 | 3-leg puller Ø 7 to 140 mm |
| U.306G2 | 3 | Legs for inside application |
| U.306M | 1 | Slide hammer |
| Y.RIV1 | 1 | Riveting kit |
