-
343 piece mechanical metric tool set supplied with
-
.7-drawer roller cabinet JET.7GM3 and chest JET.C4GM3
- With following tools
| ReferenceP | Qty | Description |
|---|---|---|
| 113A.C | 2 | Adjustable wrenches 6" and 10" |
| 115A.100 | 1 | Pin wrench |
| 134A.18 | 1 | Pipe wrench |
| 167A | 3 | Outside-circlip® pliers 13 - 18 - 23 |
| 169A | 3 | Inside-circlip® pliers 13 - 18 - 23 |
| 181A.25CPE | 1 | Lockable multigrip pliers |
| 181A.30G | 1 | Lockable multigrip pliers |
| 185.20CPE | 1 | Sheathed straight half-round nose pliers |
| 187.18CPE | 1 | Sheathed combination pliers |
| 188.16CPE | 1 | Sheathed flat-nose pliers |
| 189.17CPE | 1 | Sheathed round-nose pliers |
| 191A.22EL | 1 | Compound-leverage end nippers |
| 192.16CPE | 1 | Piano wire diagonal cutters |
| 195.20CPE | 1 | Sheathed angled half-round nose pliers |
| 200H | 2 | Riveting hammers 26 and 32 mm |
| 208A.32CBA | 1 | Plastic-tip mallet |
| 212A.40 | 1 | Dead-blow hammer |
| 221.227J2 | 41 | Tap and die set (in a case) |
| 222A.JT19 | 19 | Box set of drill-bits 1 to 10 mm |
| 231 | 1 | Three-square scraper |
| 234 | 1 | Scriber |
| 237.A | 1 | Thread restoring tool |
| 247.G | 5 | Sheathed nail-sets: 2 - 3 - 4 - 6 - 8 mm |
| 249.G | 5 | Sheathed drift punches set: 2 - 3 - 4 - 6 - 8 mm |
| 256.4 | 1 | Precision centre punch 4 mm |
| 257.G | 1 | Sheathed automatic centre punch |
| 263.18 | 1 | Chisel |
| 265.20 | 1 | Constant-profile cape chisel |
| 269 | 1 | Crowbar |
| 31.JE6T | 6 | Roll set of low profile open-end wrenches 8 to 19 mm |
| 374A.20 | 1 | Double-action oil can |
| 39.JE10T | 10 | Roll set of short combination wrenches 3.2 to 11 mm |
| 405.12MT | 1 | Precision diagonal cutters |
| 40LA | 4 | Long combination wrenches 33, 35, 36, 38 mm |
| 43.JE5T | 5 | Roll set of flare-nut wrenches 7 to 19 mm |
| 44.JE12 | 12 | Open-end wrenches 6 to 32 mm |
| 440 | 6 | Combination wrenches 26 to 30 and 32 mm |
| 440.JE18 | 18 | Combination wrenches 6 to 24 mm |
| 495A.22EL | 1 | Heavy-duty end nippers |
| 501 | 1 | Long-nose lock-grip pliers |
| 507A | 1 | Compact lock-grip pliers |
| 521.200 | 1 | Sliding jaw lock-grip clamp |
| 603F | 1 | Hacksaw frame |
| 668B.8 | 10 | Bimetal hacksaw blades |
| 673838 | 1 | Pre-insulated terminal crimping pliers |
| 701B | 1 | Multifunction tester |
| 804 | 1 | Feeler gauge, 19 blades |
| 827B | 1 | Magnetic retriever |
| 82H.JP9A | 9 | Sleeve set of hexagonal keys: 1.5 to 10 mm |
| 830A.10 | 1 | Ratchet tool-holder |
| 830A.10L | 1 | Long ratchet tool-holder |
| 834.R2 | 1 | Articulated mirror |
| 83SH.JP9A | 9 | Sleeve set of spherical head hex keys 1.5 to 10 mm |
| 840.1 | 1 | Electricians knife with wire stripper |
| 841 | 1 | Electricians scissors |
| 883B | 1 | Right-cut scroll shears |
| 89.JP8A | 8 | Torx® keys no. 10 to 45 |
| 893.316 | 1 | Locking tape measure 3 m |
| 985761 | 1 | Automatic wire cutter-stripper |
| 996.5 | 1 | Steel cable cutters |
| A.VE | 3 | 1,000 Volt insulated screwdrivers: slotted head 3.5x100 - 4x100 - 6.5x150 mm |
| AEF.J1 | 5 | Case set of Micro-Tech® screwdrivers |
| AF | 1 | Screw starter for slotted heads |
| AN | 3 | Screwdrivers for slotted heads: 3.5x75 - 4x100 - 5.5x100 mm |
| AND | 3 | Screwdrivers for Pozidriv® PZ heads no. 0-1-2 |
| ANF | 2 | Screwdrivers for slotted heads 6.5x150 - 8x200 mm |
| ANP | 3 | Screwdrivers for Phillips® PH head 0-1-2 |
| AP.VE | 2 | 1,000 Volt insulated screwdrivers: Phillips® 1x100 - 2x125 mm |
| AP6X80 | 1 | Square punch |
| AV.HT1B | 1 | Voltsage tester screwdriver 90 to 480 Volts |
| AWDH3X150 | 1 | Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder |
| AWH10X175 | 1 | Hexagonal blade screwdriver for slotted heads with hexagon shoulder |
| AWPH3X150 | 1 | Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder |
| DELA.1051.05 | 1 | Rule 300 mm |
| K.432E | 16 | 3/4" Sockets and accessories: 30 to 55 mm (in a case) |
| RL.NANO1 | 38 | 1/4" sockets: 5.5 to 14 mm and accessories (in a case) |
| S.141A | 1 | 1/2" long drive hinged handle |
| S.306A200 | 1 | Torque wrench 40 to 200 Nm |
| S.440AP | 29 | 1/2" Sockets and accessories: 8 to 32 mm (in a case) |
| STG | 5 | Files |
| T5.L65 | 1 | Trigger-release lock-grip pliers (with aluminium griping) |
| U.306A140 | 1 | 3-leg puller Ø 7 to 140 mm |
| U.306G2 | 3 | Legs for inside application |
| U.306M | 1 | Slide hammer |
| Y.RIV1 | 1 | Riveting kit |
