• Slot drills also known as slot mills, are generally a two fluted and flat-ended double-cutting tool with two radial cutting edges opposed to each other. 

• These are available in HSS, cobalt and carbide in various shank configurations.

• The flute geometry of the 2, 3 and 4 flute cutters are capable of contouring (semi-finishing and finishing), ramping and slotting operations.

• All the cutters are centre cutting and have a robust chamfer design on the end teeth to reduce chipping, particularly important on materials with low machinability.

•  Flutes designed for good swarf evacuation and a continuous, trouble-free machining operation.

• High wear-resistance and long tool life.

• two-flute slot drills for slotting and pocketing

• General purpose 2 flute slot drills for milling keyways and slots.

• Cylindrical land and profile relief for P9 tolerance and reduced tool vibration.

• Helix angle: 30° right hand helix for smooth cutting action.

• It made from HSS-E Powder Metallurgy steel.

INCH TOLERANCES:

• Diameter: up to 1/2". Tolerance: +0.0630, -0.0013.

• Diameter:Over 1/2". Tolerance: +0.1250, -0.0015.